Simple and safe semi-automatic carton flap glue sealer that can be used to seal carton end flaps, hinge covers, side glue joints, gable tops, etc.
The Mini Monoseal is a simple and safe semi-automatic carton flap glue sealer that can be used to seal carton end flaps, hinge covers, side glue joints, gable tops and other carton styles. It’s method of operation is:
1. Operator presents one end of a carton in position over the glue pot and starts the cycle via a foot pedal.
2. Carton is then manually lifted against a squaring device on the compression panel and hot melt seals the carton flaps.
3. Operator loads product and repeats process on the other end of the carton.
Size Range: (Flap Size) Min 1” x 1” (25 x 25mm) Max 12” x 4” (305 x 102mm)
Speed: Operator Dependent (Usually between 6-10 cartons per minute)
Electrical: 115 Volts (220 Volts options), 50/60 HZ, Single Phase, 700 Watt Hot Melt System
Air: None Required
Shipping: Normally less than 125 lbs (58 kg)
Available in 115 volt or 220 volt
TWINSEAL VS Minimonoseal
GABLE TOP with Minimonoseal
Semi-AutomaticCarton Sealer Up to 30 cartons / minute
Intermittent Motion Cartoner Up to 40 cartons / minute
Intermittent Motion Cartoner Up to 25 cartons / minute
A Continuous Motion Cartoner Up to 120 cartons / minute